Mingtai

For many electric operating tables, considering the cost and price, the operation of some accessories still requires manual operation, such as waist bridges, head boards, and leg boards. Let's analyze in detail how to achieve the required posture for surgery through a combination of electric and manual operation. For electric operation, three aspects are generally considered. The first is to check whether the external power supply is correct before operation. The external power supply is single-phase 220V/50Hz AC, and the power socket must have a protective ground (three-hole socket). The second is to turn on the power, the power indicator light is on (green). The third is to press the hand controller of the operating table. When you press the button of the required action with your finger, the corresponding motor action can be realized automatically, and the action stops when the button is released. In terms of manual operation, the first is the height adjustment of the waist ...

More and more hospitals now require camera systems when purchasing shadowless lamps. When installing a shadowless lamp with a camera system, the first step is to wire. So what problems should we pay attention to when wiring? As a professional manufacturer of shadowless lamps, Mingtai listed the following points for your reference. Lay a set of 2.5 square power cords to the bracket position. Lay a video cable (SYV75-5) and a control cable (network cable or dual-core power cable) from the bracket position to the position of the hard disk video recorder. If there is a pickup, add another audio cable. Put the host and camera in the same room as much as possible for easy installation and adjustment of the image zoom function. If there is an external display screen, a signal splitter should be installed to ensure that the signal strength is not attenuated and the picture quality is guaranteed.

1) Effectively reduce the early failure rate of the electric operating table, reduce the maintenance workload, thereby reduce the maintenance cost, and reduce the loss caused by the maintenance, and play a role in preventing problems before they occur. 2) Effectively prolong the period of accidental failure, that is, prolong the service life of the equipment. 3) Improve the application safety quality of Mingtai electric operating table and ensure the safety of patients and users. 4) Ensure that the equipment is in a better working condition, improve the intact rate of the equipment, and make it more effective. 5) Reduce the occurrence of incorrect operations by users, and collect feedback information in the use of equipment in a timely manner to enhance the quality of clinical equipment use.

In recent years, people’s awareness of environmental protection has increased, and the problem of energy shortage has become more and more serious. Under such circumstances, more and more medical institutions choose to use LED shadowless lamps instead of traditional halogen shadowless lamps. The traditional surgical lamp uses halogen bulb as light source, and reflects the light to the surgical field through multi-mirror reflector. This kind of halogen shadowless lamp has short service life, and the emitted spectrum contains ultraviolet and infrared rays. Although modern technology can filter out most of the ultraviolet rays, long-term use of the overall reflection halogen surgical lamp will also cause discomfort to the patient due to excessive temperature rise, and even cause damage to the patient's skin and surgical site. As an excellent cold light source, the primary characteristics of LED shadowless lamps are low light source temperature, low power consumption, long service ...

With the development of science and technology, medical equipment is gradually improved. Mingtai electro-hydraulic operating table is produced under the development of high technology, which is conducive to better treatment of patients. But what should I do if the electric operating table fails? How to repair it? If the operating table body cannot be raised but can be lowered, it is found that the sound of the motor starting cannot be heard when the up button is pressed. Power off and unplug the handle control box, open the control box, use a multimeter to measure whether the keys are normal, measure the connection line after confirming it is normal, and find that the connection line that controls the rise is disconnected. After re-welding, it works normally. There was oil leakage on one side of the electric operating table, and the waist ascending function failed. Open the guards on both sides of the operating table, after careful inspection, find the place of oil leakage, it is f...

There are two situations to consider when installing Mingtai ceiling shadowless lamp. When installing on the ceiling, it is required to embed four M12×200mm bolts in the ceiling concrete, exposing the ceiling 30mm (diameter 240 on the circumference, 360 degree quarters) in order to install the fixed disc and the fixed seat. The disc can also be hoisted and fixed with round steel bolts not less than 20mm in diameter. Then install the holder. When installed on a beam, a hoisting chassis with a diameter of not less than 320mm and a thickness of not less than 6mm can be made. On the circumference of 240mm in diameter, 360 degrees are divided into four quarters, and four holes with a diameter of 12.5 are drilled; on both sides of the disk, according to the width of the beam , weld one piece of beam splint that is perpendicular to the chassis, the size is not less than 150×90mm, and the thickness is not less than 5mm. Drill three 14.5 holes in the upper part of the beam splint in a trian...

The design of Mingtai orthopedic electric operating table not only conforms to the characteristics of ergonomics and anatomy, but also applies modern technology and humanized design concepts, and is especially suitable for various types of orthopedic surgery. In cooperation with the orthopedics C-arm X-ray machine, the patient can be lifted, pulled, reset, fluoroscopy, filmed and fixed. Modern orthopedic operating tables ensure effective traction and reduction of femoral neck, femur, and tibia fractures. The strip-shaped sacral backrest and perineal column are all made of carbon fiber composite materials that can see through X-rays, and can be adjusted for longitudinal movement., which is convenient for resetting and internal fixation under the fluoroscopy of the c-arm x-ray machine. In addition, the orthopedic operating bed can also meet the specific requirements of supine and prone spine surgery and support and maintain the normal spine physiological curvature through the lifting, ...